Simco-Ion Model 6422e / 6422e-AC Point of Use Ionizing Blower

Description

The Simco-Ion Model 6422e and 6422e-AC Point of Use Ionizing Blowers are highly efficient small blowers designed to control static discharge in confined and hard-to-reach areas. They are perfect for use in process tools where space is limited but reliable ionization is critical.

The model 6422e utilizes IsoStat technology for exceptional performance, while the 6422e-AC model features an auto-clean system to reduce maintenance and extend emitter point life.

Features:

• IsoStat® Technology: Ensures reliable and balanced ionization.
• Small Form Factor: Ideal for tight spaces, with steady-state DC ion emission.
• Versatile Input Options: 24 VDC or 24 VAC input.
• Facility Monitoring System (FMS) Interface: Allows for easy integration with monitoring systems.
• Operational Failure Alarm: Provides immediate notification of any issues.
• U-bracket Mounting: Offers flexible mounting options.
• Auto-Clean System (6422e-AC): Automated cleaning of emitter points during power down to maintain performance and reduce maintenance.

Benefits:

• Intrinsic Balance: No calibration needed, ensuring consistent performance.
• Fast Discharge Times: Effective static neutralization even in confined areas.
• Flexible Power Options: Can be powered by either equipment or wall outlets.
• Rapid Failure Response: Immediate notification and visual indication of failures.
• Flexible Mounting: Can be mounted flush or at an angle to reach constrained spaces.
• Reduced Maintenance: Auto-clean system reduces manual cleaning and extends emitter point life.

Typical Decay Time (sec):

• Less than 4 seconds (1000 V to 100 V, 30cm, 24 VAC input)

Specifications:

• Input Voltage:
  • 24 VDC or 24 VAC, 50/60 Hz, 6 W max
• Decay Time:
  • < 4 s @ (1000 V to 100 V, 30cm, 24 VAC input)
• Balance:
  • ±20 V @ 30 cm
• Technology:
  • Steady-state DC
• Emitter:
  • Tungsten, internally shielded
• Cleanroom Class:
  • ISO 14644-1 Class 5
• Indicators:
  • Power – Green; Fault – Red alarm
• Connections:
  • Terminal block for power and FMS fault signal output
• Airflow:
  • 0.65 m³/min (typical)
• Ozone:
  • <0.004 ppm (typical)
• Operating Environment:
  • 10 – 35ºC, 20 – 60% RH (non-condensing)
• Mounting:
  • U-bracket with factory installed
• Dimensions:
  • With bracket: 12.5H x 10.4W x 6.3D cm
  • Without bracket: 11.1H x 8.3W x 6.3D cm
• Weight:
  • With bracket: 0.357 kg
  • Without bracket: 0.314 kg
• Certifications:

Auto-Clean System:

The Auto-Clean System in the 6422e-AC model includes a brush mechanism that sweeps the emitter points when the blower is powered on and off. This significantly reduces the need for manual cleaning and ensures balanced, continuous ion output. Simco-Ion recommends activating the Auto-Clean System at least once a week, with cleaning schedules varying based on environmental conditions.

Enhanced Capabilities:

An alarm LED on the front of the unit indicates a high voltage circuitry failure. The rear of the blower includes a five-pin FMS interface, which provides a 4-20 mA current loop and relay output connection. The 24 VDC input connection and FMS output are conveniently located on a terminal block for easy integration into existing systems.