Credit card chip readers, smart card readers, EMV chip card readers.
Magnetic card reader, can’t read the card, what’s the matter?
If the magnetic stripe accidentally erases the magnetic stripe information, the magnetic stripe information may not be read by the POS or ATM during the transaction. At this time, the card account information must be input by key, or even cancel the transaction.
Nearly two-thirds of magnetic read failures are due to accidental erasing of magnetic stripe information (flushing),
Usually there are the following:
1: The magnetic stripe card is placed near a magnet or a household appliance with a strong magnetic field effect, so that the magnetic medium in the card becomes invalid due to the magnetic field.
2: The position of the magnetic stripe card in the wallet or wallet is too close to the magnetic bag buckle, and the magnetic medium on the card is demagnetized and damaged.
3: Due to careless storage or use, the magnetic stripe card is affected by external force and the magnetic stripe information on the card is lost. Such as being pressed, folded, scratched, soiled, etc.
4: Unintentionally put two magnetic cards back-to-back, and the magnetic media rubbed and collided with each other, thus being damaged.
2. Another reason for the failure of magnetic reading is that the terminal reading head is poorly maintained.
This problem is easy to solve, and the card issuing bank only needs to use a simple terminal cleaning card. This cleaning comes with a card cleaner that occasionally goes around the terminal to remove lint and dust from the surface. Proper maintenance of the terminal magnetic head can improve the terminal card reading ability and reduce the card reading error rate by 30%.
Card Reader Cleaning Cards, CR80 Can the card reader be cleaned with alcohol?
Card Readers require preventative maintenance for keeping the magnetic heads clean and debris free.
Reader Cleaning Card It is soaked with a 99.9% IPA solution, which effectively removes ink, debris and residues that build up on the transfer wheels of card printers.
How to use the cleaning card?
How to use: tear open the bag, take out the cleaning card, and insert it into the card reader to enter the automatic cleaning state.
Instructions for use: 2-3 times/day in high-density dust environment; 1-2 times/day in medium-density dust environment; 1 time/day in low-density dust environment.
Precautions: Do not get close to fire and heat sources when using.
What is a cleaning card?
When a credit card is inserted into the reader, dirt, oil, and other contaminants can enter the reader.
In order to read the smart chip correctly, it is important to remove these contaminants regularly to avoid reader errors. Yousite’s new Smart Card Reader
Cleaning Card removes these contaminants by gently cleaning these vital read/write elements.
Not only does this product provide superior cleaning of smart card readers. It can also be used with magnetic stripe card readers and insert card readers that use magnetic stripe technology.
This new cleaning card is a quick and labor-saving way to remove error-causing particles from most types of card readers around the world.
This product can be used in every chip PIN readers. Smart card readers. Magnetic stripe card readers. Hotel door locks. Access control, time clocks, and almost any card reader that does not automatically insert.
This product solves the challenge of keeping the card reader running.